kevlarorc
Junior Member
Hi guys,
For the past few weeks I've been having some starting issues with my bike. It's error code 19. I've already removed, cleaned, and continuity tested my side stand switch. My next step is to test my starting circuit cut-off relay. However, since my electrical knowledge is limited, I want to make sure I fully understand what the service manual is saying before I screw something up.
I understand that I need to hook up a 12v power source to the leads indicated in the diagram.
Is it simply a matter of running some spare wire that I have from my bike's battery terminals to the relay or should I be using a separate 12v power source?
Thanks for looking!
Here is a screenshot of the relevant part (pg 8-117):
For the past few weeks I've been having some starting issues with my bike. It's error code 19. I've already removed, cleaned, and continuity tested my side stand switch. My next step is to test my starting circuit cut-off relay. However, since my electrical knowledge is limited, I want to make sure I fully understand what the service manual is saying before I screw something up.
I understand that I need to hook up a 12v power source to the leads indicated in the diagram.
Is it simply a matter of running some spare wire that I have from my bike's battery terminals to the relay or should I be using a separate 12v power source?
Thanks for looking!
Here is a screenshot of the relevant part (pg 8-117):
Last edited by a moderator: