Help finding LED turn signal

[Caesar]

I just got a used FZ6 which the previous owner added an integrated break/turn light which I really like but I think the turn signal is harder to see so I want to add a pair of LED turn signals. but I am not sure where to look to get a good pair of bright LEDs. Can anyone point me in a good direction?

 

[Motogiro]

:welcome:to the best forum on the net! These guys have some nice ones.
Not to far from you?

cycle gear,dacula ga - Google Maps

 

[gnorth75]

Ive got Rizoma zero 11 led signals. They are pretty bright and Im happy with them. If you happen to get them, you can get away with a single resistor per signal and the blink rate is almost identical to the stock turn signals.

Rizoma Zero-11 LED Turn Signal, PJ's Parts

 

[Caesar]

isnt it just a light? isnt there a controller in the bike that will control the blink rate?

 

[Marthy]

I install one of those on my 6R over the weekend. Look cool. I was looking for nice LED that can run as running light also. There it is.

Harrison Specialties LED Lights, Motorcycle Backrests | Turf Stripers | Carbide Woodworking Accessories | 763-441-0176

http://www.harrisonspecialties.com/mm5/graphics/00000001/TeardropBlkAmberSideLit150.jpg

Of course it will look different on your bike, it's just a pic to show you the signals...

 

[Erci]

Several to choose from: Lockhart Phillips USA: The Sportibke Connection & Your #1 Accessories Supplier For Over 25 Years

 

[gnorth75]

isnt it just a light? isnt there a controller in the bike that will control the blink rate?

As far as I know, all the led lights require either a relay or resistors to slow the blink rate. They will work without them but they blink super fast. The rizomas come with all the necessary resistors, just gotta find a good place to hide them on the bike.

 

[fb40dash5]

As far as I know, all the led lights require either a relay or resistors to slow the blink rate. They will work without them but they blink super fast. The rizomas come with all the necessary resistors, just gotta find a good place to hide them on the bike.

Superbrightleds.com also sells the correct blinker relay for ~$9, instead of the $25+ most places want. I've been buying my LED stuff from them for years, and only had one 194 bulb go bad out of three vehicles. The blinker plugs right in and fixes the flash rate if you have LEDs, without the current draw and heat of resistors that sort of defeats half the purpose of LED bulbs.

My bike also came with an integrated taillight, and I replaced it for the same reason. I went with a FAZR6 FE kit, stock signals, and LED bulbs.

 

[crimsonrick]

I installed a motodynamics intergrated rear light and customled flushmount front signals. You can get the plug-in that corrects the blink rate from customled for a good price. Easy install and look great.