sennsa
Junior Member
Hey Guys!
Just got some bar end caps (rizoma)
The factory ones are a pain to remove?
Doing sth wrong?
Just got some bar end caps (rizoma)
The factory ones are a pain to remove?
Doing sth wrong?
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Handle bar caps
- Thread starter sennsa
- Start date
- Joined
- Jul 18, 2009
- Messages
- 8,793
- Reaction score
- 121
- Points
- 0
- Location
- Chittering Valley, West Aust.
Are you using the right size allen key? I had no problems. 
- Joined
- Jul 30, 2007
- Messages
- 5,442
- Reaction score
- 99
- Points
- 48
- Location
- Adelaide,South Australia
What Kazza said :thumbup:
The factory ones are threaded ,mine where a little hard to start with , but once you get them turning ,no probs.
The factory ones are threaded ,mine where a little hard to start with , but once you get them turning ,no probs.
- Joined
- Sep 10, 2008
- Messages
- 9,644
- Reaction score
- 160
- Points
- 63
- Location
- Ipswich , Australia (+10 GMT)
+1 to both above :thumbup:
Mancolt
Junior Member
Maybe, maybe not. One of mine came off very easily. Loosened the allen key and it screwed right out. The bolt head on the other one was rusted pretty bad, and I think I might have stripped it attempting to get it out. I might have to use a drill to pull it out now.
So the answer to your question is: They should come off easily, but there are always exceptions to the norm. If it's rusted or stripped (or both), it will be a slightly more involved process.
