Halo Project Headlight issue

astrovan2487

Junior Member
Joined
Jun 19, 2012
Messages
37
Reaction score
1
Points
0
Location
Finksburg, Maryland
Visit site
Good morning! I just bought a used 2008 FZ-6 in May that has alot of aftermarket parts. Everything seems professionally installed but I'm having an issue with the angle of the projector headlights, it's way too high! Anytime I ride when it's dark people are constantly flashing their high beams at me and driving like a$$es because my lights are pointed right in their eyes. I took a quick look before but didnt see any way to easily adjust the beam height or angle behind the lights. Any info is much appreciated, Thanks!
 
Typically there are two adjusting screws on the back of the headlight housing. I am not familiar with the FZ6, but I know that the FZ1 has two on the back on each side. Typical measurements are no more than 4" above or below the centerline of the headlight housing.
 
Good morning! I just bought a used 2008 FZ-6 in May that has alot of aftermarket parts. Everything seems professionally installed but I'm having an issue with the angle of the projector headlights, it's way too high! Anytime I ride when it's dark people are constantly flashing their high beams at me and driving like a$$es because my lights are pointed right in their eyes. I took a quick look before but didnt see any way to easily adjust the beam height or angle behind the lights. Any info is much appreciated, Thanks!

Could you post some pictures of your headlight/projectors?

Grtz,


Degake
 
Are they high and lo beam? Do they have a cut-off shuttter or are they just one mode?
 
Here's a few pics, sorry for the crappy quality

Have you tried to adjust the headlight beams?

348sfb8.png


Grtz,


Degake


p.s. Did you buy your bike from a forum member? (Just asking, because it has a projector retrofit, .... :))
 
Back
Top