davie86
New Member
so the background for my issue is as follows i am a nube, i bridged 2 wires now my fz6 wont start unless the clutch is engaged, however when i release the clutch it dies.
i have tried bypassing the clutch switch and the kickstand switch, checked all the fuses and the wiring all look good.
when i start the bike with the clutch engaged it starts but there is no running lights when i pull the brake it lights up the rear light and when the high beam is turned on it will also work.
please help as i going out of my mind with this issue
i have tried bypassing the clutch switch and the kickstand switch, checked all the fuses and the wiring all look good.
when i start the bike with the clutch engaged it starts but there is no running lights when i pull the brake it lights up the rear light and when the high beam is turned on it will also work.
please help as i going out of my mind with this issue