sixsix
Junior Member
Just got finished installing the FZ1 bar and some grip puppies, and I must say they feel great. Haven't taken it for a ride yet but I can tell by sitting on it that it's gonna be much better. I'm 6'5" with really long arms so they should help out a bunch. The install went pretty well, esp since I've never changed bars, or taken off grips before. I was more worried about the front brake master cylinder going upside down and getting air in it than anything....and I don't even know if that would have mattered. For the throttle side I measured the hole on the other side and transferred it over then drilled a hole. Worked perfectly. One thing I noticed while taking off the old bars was one of the 4 bolts that hold the bar on wasn't even tight, and the other 3 were really loose. That would have been great if the bar would have twisted on me while riding.
Anyway, here are some pics.
Anyway, here are some pics.
![fz1bar005.jpg](/proxy.php?image=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv625%2F02specv%2Ffz6%2Ffz1bar005.jpg&hash=a1c63b1deadb71662bcc7bd58b725679)
![fz1bar006.jpg](/proxy.php?image=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv625%2F02specv%2Ffz6%2Ffz1bar006.jpg&hash=88b64eaa723de600cc9eb743aa5e9fe1)
![fz1bar007.jpg](/proxy.php?image=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv625%2F02specv%2Ffz6%2Ffz1bar007.jpg&hash=f938da4a4381f3ae617cfaf6286d05f4)
![fz1bar008.jpg](/proxy.php?image=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv625%2F02specv%2Ffz6%2Ffz1bar008.jpg&hash=cb2023e94dad449ab69e59112966c849)
![fz1bar009.jpg](/proxy.php?image=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv625%2F02specv%2Ffz6%2Ffz1bar009.jpg&hash=bed3696e5dbf36f15c4a68c6b359536d)