There was a spare FZ1 bar at work so I paid nil
although had to offer my FZ6 bars as a backup in case they needed them. Having said that, I would happily pay for them, given my results.
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
FZ1 bar installed
- Thread starter sixsix
- Start date
There was a spare FZ1 bar at work so I paid nil
although had to offer my FZ6 bars as a backup in case they needed them. Having said that, I would happily pay for them, given my results.phil737
Junior Member
This is an interesting thread because my good friend (who is 5"10") liked the bars on my FZ6 so much, he put them on his FZ1! I guess that's why there's adultery...
sixsix
Junior Member
The one dealer I went to wanted 49 bucks after tax for the bar, and the cheapest I found online was like $36 shipped. I found the one I got off of ebay for 20 bucks.
SirIsaac
My mind is going, Dave
- Joined
- Apr 2, 2008
- Messages
- 582
- Reaction score
- 121
- Points
- 0
- Location
- Ohio, USA, planet Earth
I like the bars, but don't want to lean forward more than I do now. I guess it would be silly to use them with bar-backs or risers. Grip puppies are the best $8 I have spent.
On another note, you have got to remove that "Be careful or you might die" sticker from the tank!
On another note, you have got to remove that "Be careful or you might die" sticker from the tank!
Sith Lord
Junior Member
For those who have a Faired bike, how close do the FZ1 bars go to hitting the fairing. My FZ6 bars are bloody close to the fairing (near the mirrors) as it is. Surely the FZ1 bar would hit. Or because it's lower, does it slip into that gap in the fairing beneath the mirrors???
Similar threads
