Here's the pics
The last picture shows what I'm holding everything to the forks with, they are 1 1/2" stand off Cush clamps, which can be purchased at almost any hardware store. This is actually my 3rd set up, the po put it on with what looked like aluminum Popsicle sticks and zip ties..., so I used the same measurements but used some good aluminum flat stock, and some alu. Angle. I also put the Cush clamps on instead of that BS the po had. I still wasn't happy because looking at it from the side it had some big holes where you could see my ballast and all the wires, so I made this setup, for one to hide all the wires and to mount the speedo more securely, seeing how I broke the mounting tabs after some hard mountain riding. As far as the Cush clamps go, they work perfect, I even put nut serts in them so my dash will bolt right to it with out fighting with nuts, they make actual fork clamps but they are more than double the price of Cush clamps and are the same exact thing. When or if you go to buy some if they dont know what a standoff Cush clamp is, tell them it's a clamp made to hold copper pipe off the wall with out the wall it's self touching it or needing any unistrut to mount a clamp to either, but the most important thing it needs to have is the insulator, which is some sort of heat resistant hard plastic that gives the clamps the "cushion"
i can dream
