EDIT: upon further inspection, the condition would be worse by cutting the NUB (Don't DO THAT!)! It needs to be longer which is difficult to do as the flat area for the lever acts as the rest or return stop. Perhaps a set screw through the lever set at exactly the right location could be used to press the Nub in so it releases sooner. It got dark so i walked away! PS - my levers are not stock!
I never looked to close until today but it seems the front brake lever does not allow the switch to be adjusted. The little micro switch has a nub sticking out that touches directly on the lever and can not be adjust to make it activate as soon as the lever moves.
So the question is; has anyone modified it? And did the nub get stuck inside the switch housing? I ask as I don't want to mod it and ruin the switch!
Thanks! View attachment 43436
I never looked to close until today but it seems the front brake lever does not allow the switch to be adjusted. The little micro switch has a nub sticking out that touches directly on the lever and can not be adjust to make it activate as soon as the lever moves.
So the question is; has anyone modified it? And did the nub get stuck inside the switch housing? I ask as I don't want to mod it and ruin the switch!
Thanks! View attachment 43436
Last edited: