Engine Stalls

[sjryser]

I keep having a problem with my engine stalling. At first I thought it was something I was doing wrong, maybe I am. After a hundred miles or so of canyon carving my bike will die at the first couple of stop signs on the way home. It happens as I pull in the clutch to make an easy downshift. My engine stalls out and just as i let out the clutch -wham- my back tire locks because I effectively just push started my bike at 20 miles an hour. Any ideas? After it cools down a bit, it doesn't do it anymore.

 

[Stumbles06]

First stop would be checking the TPS.. (search for it, there's loads of info on it). Not sure if the '06 was affected by the recall for the TPS or not.

Once the bike is warm, what is the idle speed set at?? (What RPM's at Idle).

Check this thread for some clues...
http://www.600riders.com/forum/fz6-...ou-experiencing-poor-idle-mileage-stalls.html

:rockon:

 

[sjryser]

Thx for the link...I checked the idle and it was at 900-1040. So i bumped it up to 1150...we'll see next Thursday.

 

[Stumbles06]

Thx for the link...I checked the idle and it was at 900-1040. So i bumped it up to 1150...we'll see next Thursday.

Cool. Let us know how you go with it.

:rockon:

 

[OZXJR]

I checked the idle and it was at 900-1040. So i bumped it up to 1150

For some strange reason when I bought mine it was set way to low as well,so I bumped it up.Got it back from a service and it was low again !

Now I do all the work I can myself.I never had the stalling prob though.
I don't think it would be the TPS , not on an 06.