nilesh_b
Junior Member
Hello Everyone,
I have a FZ6 S2 2009 model.
Replaced stock exhaust with Leo Vince with cat elim pipe.
Since then it started a ticking noise..up and down the rev when its not warmed up and at Idle @ 900 RPM(Factory Setting of Idle).
Read the Idle speed should be 1250 ~ 1350 from the Factory Manual.
So upped the idle speed to 1350 and put BMC air filter too.
That has eliminated the ticking noise.
And also i am with the company specified idle.
(But when i bought it new, it came with 900 RPM. )
My question is, what implications the engine can have by increasing the engine idle to 1350?
(She also runs fine between 750 - 800 RPM without stalling )
(I increased idle by turning the screw under the left tank when engine was warmed)
Any suggestions appricaited.
I have a FZ6 S2 2009 model.
Replaced stock exhaust with Leo Vince with cat elim pipe.
Since then it started a ticking noise..up and down the rev when its not warmed up and at Idle @ 900 RPM(Factory Setting of Idle).
Read the Idle speed should be 1250 ~ 1350 from the Factory Manual.
So upped the idle speed to 1350 and put BMC air filter too.
That has eliminated the ticking noise.
And also i am with the company specified idle.
(But when i bought it new, it came with 900 RPM. )
My question is, what implications the engine can have by increasing the engine idle to 1350?
(She also runs fine between 750 - 800 RPM without stalling )
(I increased idle by turning the screw under the left tank when engine was warmed)
Any suggestions appricaited.