zacbkennedy
Junior Member
- Joined
- Dec 25, 2011
- Messages
- 91
- Reaction score
- 0
- Points
- 0
- Location
- lawrenceville, georgia
Hey y'all hope all is well. Today after finishing my paint job 1-2 weeks ago i was on the way to the gym this morning hit something very slick in a turn and laid the baby down. Let me give you a little previous information my starter button (as in the one on the right handle) has been getting stuck for sometime. Another thing is I've always had a probably with my gears, they've always worked but sometimes i couldn't get it into neutral from another gear until i started it then i could move throughout the gears. So back to the story, after laying the bike down it slid for about 15ft on the pavement (thank god for frame sliders) then another 10ft or so on the grass/mud. I can't seem to get her to start now no click in the starter but my horn works. My flashers in the back turn on but don't flash (checked the fuses and none are popped). If theres anything else i can come up with ill be sure to add it. Any advice or feedback would be awesome don't have the money to take her to a shop but i do have experience working on cars and motorcycles nothing too intense.