Silky
Junior Member
I'm looking for an easy way to connect a battery maintainer to my 04 FZ6 without removing half the shrouding and or the gas tank
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks all. Much appreciated. I'll go ahead and do it the right way. Too bad bikes don't have a cigar lighter.
Thanks all. Much appreciated. I'll go ahead and do it the right way. Too bad bikes don't have a cigar lighter.
Finally, when you undo the battery bolts, the nuts tend to fall down, so make sure you don't lose them.
You could wire up a cigar lighter type adapter and then you have an accessory outlet as well! Just put a male cigar lighter plug on your maintainer...:rockon:
I put a small piece of HEAT SHRINK under the battery terminal nuts. It holds them in place and collapses when the bolt is screwed in, works great!