CBR600RR single exhaust on my 2005 FZ6.

[newyorkien]

Haha, not the one eyed monster? As far as the joining of the pipes. . .just cut the CBR pipe where the bend at the front of the pipe ends. . .and weld on the end of the original FZ6 muffler, making sure to cut enough to replace the difference of pipe lost from cutting the bent piece. . .Then weld together...The FZ6 end should fit in the CBR pipe to make welding easier. . .NOW for the FUNNNNN PART! Holding the muffler. . .This was the biggest pain in the @$$ for me. . .There were SO many different options...I ended up welding the removable hanger bracket from the stock exhaust to the new exhaust. The problem i ran into is that the metal they use for the CBR exhaust system is pretty tinny...We had a hard time welding it. . .So we did our best and used some self tapping screws to reinforce. It was a little bit more ghetto work than i wanted to do. . .but no one will see it since its under the bike thankfully and it will DEFINITELY hold which is the most important part . .I am currently working on the mesh to fill the remaining space!

 

[Motogiro]

Great job. Killer sound!

 

[newyorkien]

PROTOTYPE FILLER- I will probably end up painting the mesh black.

 

[oldfast007]

Mine arrived today...the build begins this weekend:sinister:

 

[newyorkien]

went with a different more rigid mesh. Not final yet.

rough idea

 

[REO Scorpio]

went with a different more rigid mesh. Not final yet.

rough idea

This looks so much better. Paint/coat it matte black or match the blue and that could be the shiznit.



Scorp


---
- Sent from my iPhone 4 using Tapatalk

 

[newyorkien]

Thanks Scorp, i was actually thinking about painting it black! read my mind . . .The chrome look of it kind of detracts from the muffler a little

 

[REO Scorpio]

Thanks Scorp, i was actually thinking about painting it black! read my mind . . .The chrome look of it kind of detracts from the muffler a little

Couldn't agree more. Your project is really looking solid. I bet some of those that have followed your lead on the single can might be interested in that mesh as well.


---
- Sent from my iPhone 4 using Tapatalk

 

[Zargof]

newyorkien are you going to run the mesh in between the exhaust and taillight? I think it would give the bike a more finished look.

 

[Humperdinkel]

That mesh looks AWESOME :drool: , love your work :thumbup:

 

[newyorkien]

newyorkien are you going to run the mesh in between the exhaust and taillight? I think it would give the bike a more finished look.

Thanks everyone, I really wanted to. . .but In order to make that middle piece look good would take some work. . .Im going to finish the other side, see how it looks, and evaluate from there. . .BTW...This mesh was originally for my miatas' grill. It was $3 at home depot. . .its called gutter guard :rockon:

 

[going going.....gone]

newyorkien are you going to run the mesh in between the exhaust and taillight? I think it would give the bike a more finished look.

I agree it would just finish it off. Also black BBQ spray would be good to use heat resistant and hard wearing I used it on my old bikes engine.

 

[Zzzz]

Hi-temp is a similar product that offers quite a nice finish

 

[Zzzz]

And yeah, that's probably the best video I have EVER seen as far as demonstrating a new exhaust goes.

 

[going going.....gone]

Hi-temp is a similar product that offers quite a nice finish

I've used high temp spray in aluminium and black but found it didn't last as well as the BBQ spray.

Just looked the brand it's plasti-kote projekt paint BBQ 150 black. Just found it to be a nice hard wearing finish

 

[newyorkien]

So i just finished the other side, it took a couple minutes longer than the first because i kept having to trim the second one to make it identical to the first. . .Of course the black rubber border will be adhered down . Now brainstorming on the area under the tail.

 

[newyorkien]

Middle Insert prototype

.

 

[RedsReboot]

I just received confirmation of my order:rockon::sinister:

 

[newyorkien]

UPDATE: Final rear bezel complete


Now the only thing im debating is painting. . .

 

[Kazza]

The tip looks lethal

Nice, original work Not for me as I LOVE the twin pipes too much, but it is nice to see unique looking bikes.