Adjusting clutch/brake lever height (rotation)

[jtap1]

Hi,

I am just wondering if anyone can help me on any tips to adjust the height of the clutch and brake levers? Is it adjusted by loosening the hex screws? They seem really tight and I didn't want to break anything.

 

[thethendi]

Yes, it's the hex screws for the brake side, and I think a small bolt for the clutch side (I have an 05, but it's probably the same for the other years). I do remember the brake hex nuts being a bit tight - but they should loosen pretty easily.

 

[TownsendsFJR1300]

Also, when re-tightening, just snug it down enough not to rotate.

his is done so that if you drop the bike it'll rotate and NOT break the lever..