2008 FZ6n radiator cowls

[UselessMeatball]

I've recently got addicted to bolting things onto my bike, anything that can be put on, I'll put on. I've recently came across a few radiator cowls/shrouds/covers but every set I find is always ranged from 2003-2007. Does anyone know if they'll still fit on the 2008 model? I really like the look of these as I've already put a belly pan on and I think it would really tidy up the area under the tank.

 

[Nelly]

:needpics: Sorry I had to say it, as far as I am aware if it fits the 2007 (non ABS) model it will fit the 2009 model. Do you have ABS?

Nelly:thumbup:

 

[Carlos840]

Apparently the radiator grill i have fits on all models from 2004 to 2009, so i assume the fixation must be the same for all years!

Yamaha FZ6 Radiator Guard | Yamaha | Buy Motorcycle Parts

Here is mine, it is really well made and the finish is very good:

 

[jonvt]

I could be wrong but I think the OP meant cowls for the side of the radiator. Some pics I found here:

FZ1OA Message Board - View Single Post - Wiring the FZ1N Headlight
FZ1OA Message Board - View Single Post - Wiring the FZ1N Headlight

Not sure where those are from. Just thought some pics would help. I just bought and am in the process of installing the FZ1N headlight. When I bought the kit from partshark there was an option for radiator guards but I did not get them. Might think about it in the future. They do look pretty good. The price of the kit without them was high enough..

http://cdn-4.psndealer.com/e2/dealersite/images/partshark/FZ1N--.bmp

 

[UselessMeatball]

I could be wrong but I think the OP meant cowls for the side of the radiator. Some pics I found here:

FZ1OA Message Board - View Single Post - Wiring the FZ1N Headlight
FZ1OA Message Board - View Single Post - Wiring the FZ1N Headlight

Not sure where those are from. Just thought some pics would help. I just bought and am in the process of installing the FZ1N headlight. When I bought the kit from partshark there was an option for radiator guards but I did not get them. Might think about it in the future. They do look pretty good. The price of the kit without them was high enough..

http://cdn-4.psndealer.com/e2/dealersite/images/partshark/FZ1N--.bmp

That's exactly what I mean. I've seen a few a bit larger than those though but as I say they're all ranged for earlier models than mine. I'll attach some pictures of mine on the next post.

 

[UselessMeatball]

View attachment 49637

Here's one just of the bike

Everything looks pretty similar to earlier/later models

 

[UselessMeatball]

View attachment 49638

And this is the cover in question. 185mm it measures.

 

[UselessMeatball]

:needpics: Sorry I had to say it, as far as I am aware if it fits the 2007 (non ABS) model it will fit the 2009 model. Do you have ABS?

Nelly:thumbup:

Sorry to have ignored you. No, I don't have ABS and it's an S2 if it matters.

 

[UselessMeatball]

Ermax Radiator Covers suitable for a Yamaha FZ6 (2008)

Found these bit they're a bit pricy. Apparently from 2007 - 2009 everything basically remained the same.