fender eliminator

Hello! I would eventually like to do away with the shovel and tidy up the tail, but, it seems like many options are nearing triple digit costs. At that rate I'm fine with keeping the rear stock. Does anyone have recommendations for fender eliminators that were of good quality, allow the OEM...

Hi guys, Only got my FZ6 -2004 - faired a few weeks ago and am loving it! I want it to be a dual purpose motorcycle, acting as a English B road carver when I'm out with the guys, and a pack horse luggage carrier when I go 2-up riding with my wife and do some short haul touring. It seems to...

I searched for a post but none were available that answered my question. I want to get a fender eliminator with the turn signals. First question is how hard is it to remove the stock fender, replace it with the fender eliminator and then wire the rear turn signals so it actually works...

I sold my bike and have for sale phranK2k11's BYF glasspacks ($150) and FAZR6 FE ($15) you pay for shipping. Both came from a 2009, they are used so it does have some scratches as you can see from the pictures but nothing a can of paint can't fix. Only 4 of these custom exhausts are made by...

Hi everybody - great forum! Probably the most helpful I have seen. I did a search for this answer but didn't find anything. I have a 2008 FZ6 that is lowered with a Soupy's lower rear shock mount - I think it lowers the bike about an inch, and also I have lowered the front about 3/4 inch...

I just bought a FZ6 2006 I ordered a tinted blinkers, and tinted taillight with signals in it. And I want to clean up the rear by just having the plate under the exhaust, any ideas? Thanks, Jarin

SO, my street-fighter project continued with another little DIY mod (it's here, for those interested). I needed a change to the stock tail section, as it was kinda massive and became ever-more-so glaring as the bike continued to get converted. Below is what I fab'd up ...a unique fender...

you go to harbor freight or home depot and buy a stainless steel mud tray for four dollars....and you cut it with tin snips and there you go very easy very rigid

And besides my levers, I also replaced that gawd awful fender with a Rumble FE. It was kind of a biyotch to replace in terms of just getting it on. It seems like every time someone powercoats something, they don't realize the tolerances are smaller! I really had to wrestle this thing to get it...