Search results

1600km should be no problem for the fazer. I did 1460km in 13 hours a few times now. I think the only problem is rider fitness and planning all your fuel stops properly. Good Luck!:thumbup:

I did 1460km in 13 hours a few times from Guateng to Cape Town here in South Africa. I love my long distance runs.

Maybe 6.5kg's rear and 3kg's front? not 100% sure..

Very nice!!

I have a 190 on the rear, works well and fits. I use the Michelene Road 2ct 190. :thumbup:

245km/h on clocks. Faired version 08' model.

Hi Guys I have been searching for a solution to this. It's also driving me crazy. It's almost like a plastic buzzing noise. Mine is exactly at 8000 rpm. I doubt it is the engine injectors.

93 octane here in south africa and 98 by the coastal regions.

I have mine at 15mm, works well for me. :thumbup:

Hi There I am from Midrand, where are you based Wolfman? Nice idea!

1.9 rear and 2.1 front worked well for me at Phakisa last weekend.

Also use chain wax and not chain lube. I think wax does a better job personally.

I would only consider doing this if my screen was badly scratched. Looks good!

Firstly check that the rear wheel is aligned properly with the indicators on the swing arm. Secondly there should be about 3cm play if you lift the chain up with a finger. Otherwise it could be too tight.

Hi Guys Thanks for all the replys. yesterday was a pubic holiday so I took off the exhaust and took the oil sump off. It was a messy job and very stressful. It took me about 3 hours. The needle is out and everything back to normal. I am however concerned the the sump bolts seem to...

Oh Right! Seen them. Thanks.

Thanks What are dowels?

I guys The mechanic that services my bike over filled the oil so a friend of mine said to use a needle and injection to suck up some oil from the dipstick hole. All went well until the 3rd time when I pulled it out and the needle fell into the sump. I have tried using a magnet. I have...

I just did a track day on Sunday. I am 90kg. I found that the bike was all over the place on factory setting #3. I then set it to #4 and found the bike was better coming out of corners and kept it's line better. I also managed to get rid of the chicken strips. :D Adjust to your weight!

Maybe the Fuses?