Recent content by IPilot

Ok guys sorry for the late post but I was out of the country and then pretty busy at work. I fixed the bike thanks to all of you and your awesome advice! I changed both the relay and the neutral sensor and that was it! Everything is running as smooth as before. You guys are great! Thank you...

Ok I tested again and it did shut off when I took the ground off the neutral sensor wire. So what is the relationship of the side stand safety switch and the neutral? And the relay assembly is the one I disconnected from the sensor for the previous tests with the multimeter right? So what part...

Thank you! Please look at my last post. What do you guys think? Sent from my iPhone using Tapatalk

I tested the sensor and it didn't do anything either. I can't start the bike with the side send up and the clutch in either. So should it be the relay? What else should I test? Sent from my iPhone using Tapatalk

Thank you guys! Tests done. Neutral switch test was the only one with no readings at all. The other tests gave me readings for open and close. What should I do now? Sent from my iPhone using Tapatalk

Ok understand. Now my connector does not have numbers and the colors are confusing. I'm attaching 2 pictures so you can probably tell me which one is what? Thank you again for your patience!! Sent from my iPhone using Tapatalk

Yes I know which one is it. So everything with the power off. What do I do? Sent from my iPhone using Tapatalk

Ok I finally got the multimeter. I am sorry I am not really good at this. Where are the 3 switches and how is that I test them? I just don't want to assume anything and do something wrong. Also, the bike needs to be on right? (I promise I'm not joking... I just want to learn how to do it the...

I'm getting a multimeter this afternoon. How do I test that all of the switches are working? In not an electrical guru... Sent from my iPhone using Tapatalk

The side stand was up. The relay I am talking about is the one that goes on top of the battery which has the neutral wire connected to it and has two fuses. Fuses are good... I've read some other places that relay could be the problem. Sent from my iPhone using Tapatalk

Ok so I guess there is some progress now. I grounded the neutral wire to the rear tire bolt with a jump cable, turned on the switch and there is the green light! Now the bike started. When on the center stand still grounded, I put in first gear and it worked but the light still on neutral green...

Still no luck. I've looked everywhere and everything seems to be attached and working with the exception that the bike won't start. I read on the R6 forum that probably grounding down the neutral switch wire that is behind the engine block? How do I ground it down? Any other...

Hey guys thanks a lot for your help. I finally got the new handle bar installed and the wires repaired for the ignition. Now another problem came up... When turning the bike on, everything seems normal and you can hear the normal ignition sound when turning the switch to on. Now, the neutral...

A couple of weeks ago I walked into 2 guys trying to steal my bike from my building garage... (main gate was broken). Anyways, they went away but substantially damaged my baby. (2008 Black FZ6) They cut the wires to hotwire it, which was done successfully, and then they were trying to force...

I took the ERC this past summer as well and I found it really like the second day of the basic one as also. There were a lot of things that practicing them with my own bike was really helpful to improve my riding skills. I also recommend taking it every couple of years or so.