gamestone
Junior Member
- Joined
- Oct 11, 2007
- Messages
- 23
- Reaction score
- 2
- Points
- 0
- Location
- Erith, Kent, UK
Tools required
4mm Allen Key - Trim screws
Phillips screw driver - Removing the original visors
10mm Ring spanner or socket - Mirror removal
T25 Torx screw driver or driver bit - New Knuckle Visor screws
So lets start
Remove the four large 4mm domed cap head bolts on the side fairings holding the small black dash trims, take the two trim pieces out watching that you don't scratch the tank.
Remove the six 4mm domed cap head bolts holding the large inside dash panel (two on the inside)
The original Visor trim is removed by undoing the two screws on the inside (per side), also removed the two 10mm Nuts (per side) holding the mirrors on.
4mm Allen Key - Trim screws
Phillips screw driver - Removing the original visors
10mm Ring spanner or socket - Mirror removal
T25 Torx screw driver or driver bit - New Knuckle Visor screws
So lets start
Remove the four large 4mm domed cap head bolts on the side fairings holding the small black dash trims, take the two trim pieces out watching that you don't scratch the tank.
Remove the six 4mm domed cap head bolts holding the large inside dash panel (two on the inside)
The original Visor trim is removed by undoing the two screws on the inside (per side), also removed the two 10mm Nuts (per side) holding the mirrors on.