It would be nice to find out what we all have planned for mods. or whatever on our scoots for those of us that are not lucky enough to be able to ride year round......For me ...cans, fuel remapping, cat eliminator and paint graphics.....:cheer:
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
What will you be doing to your bike this winter ..
- Thread starter Daryldaddy
- Start date
Cool, hope you post up some pics!!! I am hoping to be done with mods for a while once I salvage a busted TS seat.
Moses195
Junior Member
Riding IT!!!!!!!!!!!!!!!!!!!!!!
macem29
Banned
I'll be thinking of mine fondly, winterized it and locked it in a storage container,
heading back to Afghanistan in a few days, I'm spending the winter there....
gonna order up a taller screen, frame sliders and try the Motek luggage I
scooped cheap, I'll see it again in April
heading back to Afghanistan in a few days, I'm spending the winter there....
gonna order up a taller screen, frame sliders and try the Motek luggage I
scooped cheap, I'll see it again in April
For the FZ1, I am going to make a custom exhaust bracket and get rid of the pillion brackets and pegs. Order Copperdog's sub-throttle plates for that mod.
For her FZ6R, I have some T-Rex no-cut sliders sitting in front of me. I have in the mail a 1.75" rear lowering link and shorter kick stand from Roaring Toyz. I'll be dropping her triples on the forks as well. Customizing the fender much like I did on the FZ1.
Both bikes will get new screens.
For her FZ6R, I have some T-Rex no-cut sliders sitting in front of me. I have in the mail a 1.75" rear lowering link and shorter kick stand from Roaring Toyz. I'll be dropping her triples on the forks as well. Customizing the fender much like I did on the FZ1.
Both bikes will get new screens.
nextfriday
Junior Member
Think i'm going to put on some powerbronze lowers. I recently reduced the size of my stock rear hugger. Highly recommended for showing off the 180 rear and cleaning up the back of the bike.
ant_mb
Super *********
We'll I still have these to install.
All Balls(head bearings)
FZ6 cup belly pan(In paint shop now)
Alarm(in porogress)
New relay for stebel horn
Other than that I'll be riding any day I can.
All Balls(head bearings)
FZ6 cup belly pan(In paint shop now)
Alarm(in porogress)
New relay for stebel horn
Other than that I'll be riding any day I can.
- Joined
- Jul 30, 2007
- Messages
- 5,442
- Reaction score
- 99
- Points
- 48
- Location
- Adelaide,South Australia
Hey Ant,I just got around(finally)to installing a new relay for my Stebel just yesterday !
ant_mb
Super *********
Yea, I didn't protect my first relat well enough and it went one me. I just connected the stebel to the switch. You can really tell it's not as powerful as it was, and I've blown a fuse at least once(maybe twice).
Have2BeFree
It's My Bike!
Fixing this:
View attachment 22839
View attachment 22840
View attachment 22841
View attachment 22842
View attachment 22843
Already priced out the parts, it won't be too expensive. Track day was still worth it :thumbup:
View attachment 22839
View attachment 22840
View attachment 22841
View attachment 22842
View attachment 22843
Already priced out the parts, it won't be too expensive. Track day was still worth it :thumbup:
- Joined
- Jul 30, 2007
- Messages
- 5,442
- Reaction score
- 99
- Points
- 48
- Location
- Adelaide,South Australia
Yup,mine went out too but it was inside the fairing,I don't think it was that good to start with .I went straight to the switch to .I agree ,much louder with the relay.
Okay its not an FZ but the 11 has lots of goodies in store now that the fueling is pretty much sorted. Thank goodness for being employed again!
Recent:
1) Buell Tank bag, large (huge bag - okay that is kind of rude...sorry)
2) Rizoma grips, black - Ultra trick, thanks for the help everyone.
3) Rizoma barend sliders - black, Rizoma, of course its cool.
4) New Pirelli Corsa III rear tire - Free from HD!
5) EBC Brake Pads - Need to pop the front wheel off....
Future:
1) Buell lowers
2) Brembo Front Master and Clutch Cylinders
3) Dyno Tune and Power Commander - November I hope.
4) FULL Exhaust - Free Spirits full system, waiting on the quote.
View attachment 22844
Recent:
1) Buell Tank bag, large (huge bag - okay that is kind of rude...sorry)
2) Rizoma grips, black - Ultra trick, thanks for the help everyone.
3) Rizoma barend sliders - black, Rizoma, of course its cool.
4) New Pirelli Corsa III rear tire - Free from HD!
5) EBC Brake Pads - Need to pop the front wheel off....
Future:
1) Buell lowers
2) Brembo Front Master and Clutch Cylinders
3) Dyno Tune and Power Commander - November I hope.
4) FULL Exhaust - Free Spirits full system, waiting on the quote.
View attachment 22844
Last edited:
Ohhh.......U LUCKY DOG....!
............OUCH......! love your spirit .
Okay well forgive you haveing a buell......hey I think there cool , last year i was contending on buying one but the $ would of made a big dint into my beer funds..!!!
stryken
Vertically Challenged
Install front Hyperpro lowering springs to match the rear I have had on all summer! ... oh and detail it!! :thumbup:
agp
Junior Member
Dual headlight harness from BD.
Have headlight moles, rad. guards and seat cowl painted to match.
Hyperpro spring set.
Have headlight moles, rad. guards and seat cowl painted to match.
Hyperpro spring set.
fazer.rider
Super Member
fixing it up lol :spank:
chemicalsmile
Junior Member
Going to get belly pan, exhaust cover, headlight cowls (moles?) and a few other little things painted. Maybe a Hyperpro shock spring. With the new racetechs out front the rear seems really vague and crappy now.
madmanmaigret
Mad like crazy not angry
Well we really don't have winter but..........
1. '03 GSX-R 1000 headlight
2. KMP MIni-Fairing w/custom brackets
3. New Motovation Sliders
4. Al Balls (in progress)
5. new pegs
6. FZ1 Bars
7. install new tank
8. Paint........whenever I make up my mind on what color
9. <this is the most important RIDE!!!!!! (haven't been able to since February 1st!)
Be afraid, be very afraid........
I am sure there is more but this is the bulk of it.
1. '03 GSX-R 1000 headlight
2. KMP MIni-Fairing w/custom brackets
3. New Motovation Sliders
4. Al Balls (in progress)
5. new pegs
6. FZ1 Bars
7. install new tank
8. Paint........whenever I make up my mind on what color
9. <this is the most important RIDE!!!!!! (haven't been able to since February 1st!)
Be afraid, be very afraid........
I am sure there is more but this is the bulk of it.
