not bad for a 2005... after a good bit of cleaning with s100 and then a full bath it looked good. add on the sealant and 1 coat of wax and BAM it looks hot!! :thumbup:
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Waxed and Ready To Go!!!
- Thread starter LERecords
- Start date
not bad for a 2005... after a good bit of cleaning with s100 and then a full bath it looked good. add on the sealant and 1 coat of wax and BAM it looks hot!! :thumbup:
mongol777
Member
LOVE S100 - awesome stuff!
I just use it every other day to dust off and after rain.
I just use it every other day to dust off and after rain.
mongol777
Member
btw, headers r real easy even on the bike (without taking them off).
All you need is autosol, steel wool, fine grit sanding paper (I usually use 1500-2000) and microfiber to finish off.
Before:
After 1 hr and couple of pints:
Direct links
https://skydrive.live.com/redir.asp...87F1C7E5DF594442!377&authkey=!ADPVu0HFDbFt8WE
https://skydrive.live.com/redir.asp...87F1C7E5DF594442!377&authkey=!AFx0wCAaoKj_JvA
All you need is autosol, steel wool, fine grit sanding paper (I usually use 1500-2000) and microfiber to finish off.
Before:
After 1 hr and couple of pints:
Direct links
https://skydrive.live.com/redir.asp...87F1C7E5DF594442!377&authkey=!ADPVu0HFDbFt8WE
https://skydrive.live.com/redir.asp...87F1C7E5DF594442!377&authkey=!AFx0wCAaoKj_JvA
Last edited:
tejkowskit
Gold Member
Very nice! This reminds me I have to clean mine!
Mongol those headers look great!! I'm definitely going to try that out!
Mongol those headers look great!! I'm definitely going to try that out!
mongol777
Member
Very easy:
1. Start with some degreaser/shampoo to get loose dirt off
2. Dry
3. Apply autosol liberally
4. Polish with steel wool
5. Hard spots - follow with fine 1500-2000 grit
6. Rinse
7. Autosol or metal polish/wax of your choice
Done!
It was more about the wax, but yes... I would like to do them some day, but I'm just lazy.. The bike get soo much attention already...
PY07FZ
Junior Member
Those headers look great mongol777 :thumbup: Need to give mine a good shining next time I wash my bike.
btw, headers r real easy even on the bike (without taking them off).
All you need is autosol, steel wool, fine grit sanding paper (I usually use 1500-2000) and microfiber to finish off.
Before:
After 1 hr and couple of pints:
Direct links
https://skydrive.live.com/redir.asp...87F1C7E5DF594442!377&authkey=!ADPVu0HFDbFt8WE
https://skydrive.live.com/redir.asp...87F1C7E5DF594442!377&authkey=!AFx0wCAaoKj_JvA
Similar threads
