Chris Parker
Junior Member
Ok, so I've been looking around a bit and want to make sure I have a clear picture of how the EFI system works on our bikes. It seems to be a bit primitive.
Basically it has one static fuel curve, which is adjusted up and down on the y-axis from feedback from the o2 sensor, correct?
So the bike is able to adjust for humidity and altitude, but is NOT able to adjust for mods because the mods MAY require a different fuel curve due to different airflow at various RPM's versus stock.
...correct?
EDIT: Forgot to put in that I was referring to the 07-later models.
Basically it has one static fuel curve, which is adjusted up and down on the y-axis from feedback from the o2 sensor, correct?
So the bike is able to adjust for humidity and altitude, but is NOT able to adjust for mods because the mods MAY require a different fuel curve due to different airflow at various RPM's versus stock.
...correct?
EDIT: Forgot to put in that I was referring to the 07-later models.
Last edited: