krim
Junior Member
Re: Rizoma front/rear turn signals-"drop"
Zackeboy : i'm going to order those tonight . Thanks
I recently put Rizoma's on my naked kit and have other aftermarket LED's on the rear fender. I used the adapters listed above for both. There is a large, almost egg shaped opening to mount the stock signals. A normal washer and nut is too small to hold the signals in place if you are using the stock mounting locations. I have seen this overcome two different ways - using larger washers on the inside and outside of the fairing, or using adapter plates. I went with the latter and just bought the adapter plates.
Zackeboy : i'm going to order those tonight . Thanks