Please help. Fuel pump won't prime

[squirrel30668]

Ok so I have a 2007 fz6 and I noticed my battery sounded weak. So I took it out and charged it. When I put it back in the bike ran fine but the fuel gauge flashed. Looked at both plugs under the tank and they appear fine. Took the fuel pump out to make sure nothing looked out of place and everything looked fine. Put everything together and now the fuel gauge isn't flashing but now the fuel pump won't prime and the bike won't start. I checked voltage at the green plug and there is none. Checked voltage at the white plug and it just over 6 volts. What's going on with my bike?

 

[Gary in NJ]

Welcome to the forum. Let’s start with a basic question; Did you check the fuse?

 

[squirrel30668]

Welcome to the forum. Let’s start with a basic question; Did you check the fuse?

lol funny you asked that. I was thinking the fuse would be the last thing it would be so it's the last thing I checked. Bingo lol. Not sure how it happened but the 10 amp ignition fuse was blown