oxygen sensor eliminator kit idea ??

[GravisMaximus]

was looking at this kit Oxygen Sensor O2 Eliminator - Yamaha FZ6 FZ6R FZ1 FZ1N FZ8 FJR1300 | eBay and would like someones feedback who has one. it looks to me to be 1 of 2 things, just a blank plug so water cant get into the plug, thou i doubt it due to the description in the link of the item (will set code if just unplugged). Or its a jumper plug, simply connecting pins 1+2 and 3+4 in where the black plugs are. thanks in advance

 

[FinalImpact]

No details in link but the cost implies you're buying something more than a plug, just not much more. The narrow band O2 sensors have a heater and their output switches back and fourth like a sign wave. So if it has a basic resistor and it is a simulator (IT DOESN'T SAY THAT), it may work.

If its just a blank plug the ECM is not going to be happy and will throw a code. Off hand, most simulators cost more than listed there.

Call or write them and ask.
v3narrowbandsim [ECMTuning - wiki]

 

[GravisMaximus]

i was able to talk to the company that is selling this eliminator, to sum it up there is indeed a jumper connecting the pins. the jumper is a resistor!!

so anyone who has one of these could you please take the boot off from the back of it and tell me what the colors are on the resistor and or any numbers, and or a pic would be :thumbup:

 

[BlackMilk]

Why would you want to remove the sensor from its normal position?

 

[Motogiro]

Why would you want to remove the sensor from its normal position?

Probably because he's playing with tuning (C01/C02) and the O2 sensor causes the OEM ECU to readjust or pop an error code?