fazil
Junior Member
I had a puig S1 naked windshield laying around from long time ago. I never had a chance to install it. It was designed to install on original upper triple yoke, but i had R6R front end and yokes. So i tried to clamp it to handlebars.
I used the old original front fairing brackets and bought a cheap plastic 22mm clamp from marine equipment seller.
Playing with hardware is always fun. Joined them together.
And installation:
After some adjustments, there is some space below the screen, i hope wind will not come out of those holes.
I used some rubber to prevent vibration between screen and headlight.
It looks like a Tenere after all
Last edited:
