• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

Mirror Vibration - What level is normal/non-correctable?

KHarper4289

Member
Joined
Feb 26, 2016
Messages
67
Reaction score
0
Points
6
Location
San Diego, CA
Visit site
Just curious as to how much vibration other FZ6 Gen 2 riders have.

I know this is a buzzy machine, so to an extent it is not correctable. I do not have any vibration issues in my hands/bars, actually it's quite comfortable even with the thin stock grips. My mirrors on the other hands... Once I'm above 8500 RPM they are virtually useless, below 8k they are crystal clear.

I've looked into the spark plug stuff on the big 'fix your vibration' thread, everything is good to go, just wondering if this is normal or if I should dig deeper.
 
Mine faired S2 is clear a view out back from idle to WOT!

Buzzkill 101 Journey had these players:
Spark plug caps
Exhaust fitment to chassis
Chain conditon and alignment
Engine oil quality (dump Mobile 1)

That said, ignition wires bit me several times. Some just 500mi after last repair.

IMO they are not a buzz bomb when everything is right. But if you add all that up, they can be!
 
Back
Top