javahaxxor
Junior Member
Installing frame sliders seems just a bit more tricky than assembling something from IKEA.
the bolts are steel, the frame is aluminium, you don't want to tighten it too hard. You might want to apply some locking agent so the engine doesn't fall off because the vibration loosened the bolts. I'm planning on taking some screenshots of the bike and manual, write down some figures for torque tightening, locking agent, and so on. Please give suggestions.
First of all, go get a torque wrench. Can you upload pics to this forum, or do I need to upload the pics to somewhere else?
the bolts are steel, the frame is aluminium, you don't want to tighten it too hard. You might want to apply some locking agent so the engine doesn't fall off because the vibration loosened the bolts. I'm planning on taking some screenshots of the bike and manual, write down some figures for torque tightening, locking agent, and so on. Please give suggestions.
First of all, go get a torque wrench. Can you upload pics to this forum, or do I need to upload the pics to somewhere else?
Last edited:
