Mar 14, 2009 #1 coursonap Senior Member Joined Jul 9, 2008 Messages 278 Reaction score 0 Points 0 Location Illinois profile.myspace.com Anybody know how to adjust the idle on the 2008 fz6? Mine is idling about 1600 rpm it is supposed to be between 1250-1350rpm.
Anybody know how to adjust the idle on the 2008 fz6? Mine is idling about 1600 rpm it is supposed to be between 1250-1350rpm.
Mar 14, 2009 #2 Hollywood416 Junior Member Joined Jun 7, 2008 Messages 248 Reaction score 0 Points 0 Location Jacksonville, Fl Visit site Left side of the bike look under the frame rail below the tank. You'll see a silver phillips head screw attached to the throttle bodies. Clockwise to increase, counter to decrease. Should also be a diagram in the manual.
Left side of the bike look under the frame rail below the tank. You'll see a silver phillips head screw attached to the throttle bodies. Clockwise to increase, counter to decrease. Should also be a diagram in the manual.
Mar 15, 2009 #3 reiobard Samurai FZ Soldier Elite Member Joined Nov 29, 2007 Messages 7,614 Reaction score 67 Points 0 Location Hillsborough, NH Visit site make sure that the bike is warmed up before adjusting... and 1600 is much too high, good heads up.
Mar 15, 2009 #4 SovietRobot Scourge Of Humanity Joined Sep 11, 2008 Messages 1,617 Reaction score 13 Points 0 Location Napa, CA Visit site I've seen my idle hit 1500~ during warmup. Once you get 2 bars on the temp gauge and the tachometer stops flashing, it's "warmed up", only then should you mess with the idle adjustment.
I've seen my idle hit 1500~ during warmup. Once you get 2 bars on the temp gauge and the tachometer stops flashing, it's "warmed up", only then should you mess with the idle adjustment.