Homemade Fender Eliminator

[a_sick1]

I bought a FE kit on ebay from creese1...
eBay Motors: 0405060708 Yamaha FZ 6 FZ6 SILVER Fender eliminator TSM (item 250283643059 end time Aug-23-08 19:37:10 PDT)
never shows up...
so i made one.
It took about two hours to make and install.
I used the original plate light and reflectors.
cost about $5 between aluminum and bolts!!!
I'm finally cool now!!!:Flip:

 

[jwhelan]

looks good, any chance of getting the schematics?

 

[bertmoog]

Um, despite what you might think, youre not cool until you tell us how you did it. :spank:

 

[a_sick1]

This is everything you need
3 pieces of aluminum
bolts
hammer
vise grip
hacksaw
aftermarket turnsignals
ruler
sharpie
punch
drill
basic hand tools

i'll give you measurements tomorrow

 

[thirty_too]

the FE that you made, is it possible to use the stock turn signals? i would be very interested to see if this is possible... thanks

 

[a_sick1]

this is custom work here... you could do whatever you want.
You would have you get wider pieces of aluminum to mount the turn signals, and you would have to cut custom holes to fit the stock egg shape.

 

[thirty_too]

thankyou for the underside pic :Flash:

 

[chemicalsmile]

Nicely done - been thinking about doing this myself. How do you like those LED signals you've got on the back? Can you actually see them from the back side (with the little translucent orange tip)? Saw a set of them on egay and was thinking about buying them.

 

[a_sick1]

they are bright as hell!
14 LEDs.

 

[codeblue]

that's a good looking mod for home made. Have you considered painting it black to hide the silver appearance? I'm sure it will look better painted black.