Help with R6 rear shock and forks that were installed on my FZ6 before I bought it

Gary in NJ

Junior Member
Site Supporter
Joined
May 6, 2014
Messages
1,964
Reaction score
1,908
Points
113
Location
Amoungst the Twisty Roads
Visit site
Not just yes...but HELL yes. A typical rebuild usually includes seals, oil and N2 - with an untrasonic bath. Local shops usually get around $125-$150, and I've seen some of the shops on line that do pro level work that usually include a new bottom cushion, and any adjustments to the valving at $250...or higher (my DRZ has one of those expensive jobs because it required a lot of valving work after it was internally shortened). If you need a new spring, add another $110 to the bill.
 

Tom24GR

Member
Joined
Nov 12, 2020
Messages
69
Reaction score
17
Points
8
Location
Bronx, New York
Visit site
Oh lord! I didn't know. I would do it myself but since I don't have nitrogen I'll pawn it off. I have practically restored this bike single handed. I can take a rest on the last job.
 
Top