Help with Fende Eliminator

[mass835]

Has anyone installed this fender eliminator kit?

YAMAHA FZ6 FZ-6 TAIL TIDY FENDER ELIMINATOR 2004 2005 2006 2007 2008 BLACK 4T/S | eBay

Also, it looks like the wiring to the turn signals are molded into the connector. Are you guys that are using LED signals cutting the wire and and then soldering that to the LED?



Thank for the help, first post here. Just got the bike a couple weeks ago and am not too familiar with it.

 

[red06]

i have this kit , the signals are universal so they will not come with any connectors
to do this :
you will leave the black and grey stock signal connectors connected
leave a lot of wire length before cutting off the stock signal wires

then you have a blue and a black wire those are for the plate lights
you can solder/ tape/ or use fancy connectors . its an easy install i used shrink tube to protect the LED signals wires all the way to the connector

dont forget to test each LED signal making sure it works properly before you connect them

 

[dazzler]

hi there, i have also just fitted this kit. its great but the led indicators now flash to fast, any ideas how to solve this little issue? thanks, darren.

 

[irish190]

hi there, i have also just fitted this kit. its great but the led indicators now flash to fast, any ideas how to solve this little issue? thanks, darren.

Rumble Concept LED Signal Flash Controller 2 - Street Bike - Motorcycle Superstore

Something like this, there are many out there.

 

[DownrangeFuture]

Get a digital flasher. http://www.600riders.com/forum/fz6-electrical/42693-electronic-flasher-relays-great-price.html

EDIT: I bought that kit without the signals cause I bought Rizoma signals. It works great. Not really any smaller than the stock, but it looks tons nicer. If you don't want to solder, posi-tap makes awesome little connectors that are weatherproof.