• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

HELP! noticed a hose hanging that i dont remeber....

cvxsuck1

Junior Member
Joined
Apr 10, 2008
Messages
24
Reaction score
0
Points
0
Location
Virginia Beach
Visit site
I got off work yesterday and saw a hose hanging by the frame stand. its looks like its coming from the air box as a breather valve. it was leaking a little bit of oil, very little. the hose is all black with a single white ring and it cut at an angle. any know about this hose or if its been there the whole time and i didnt notice it. it looks like i have two breather valves. any help would be greatly appreciated.UGH! thanks.
 
You should have two drain hoses there. Don't worry they belong there. One is the battery drain/breather hose, the other is usually the fuel tank breather. I say "usually" as I've never bothered to trace mine back to the source. You're good.
 
it looked like oil, but it could have been dirty fuel in that hose i guess. ill have to smell it next time. i scared me i was like were did that come from. also i just noticed i ran over a nail. DAMN!! gotta get that patched.
 
according to my manual I should have 3 hanging down there, I only see one, guess the other two are stuck up there when someone moved the gas tank for maintanance.
 
You all know you missed a perfect opportunity to say.


OH MY GOD!!!!!! RUN!!!!!! FOR YOUR LIFE!!!!!!






Oh thoses hoses no biggy.
 
On an '07 there's a wire that drops down to the exhaust pipe at the very bottom (some kind of sensor?) and a line that drops down on a circuitous route from the gas tank. It's the overflow or airvent of some sort. When the tank is lifted it shouldn't pull up at all....at least it doesn't on mine as it's clamped securely. It starts below the tank on the left side, swings around to the right side and drops. This is the one that has a slant cut at the bottom. I am familiar with this hose as I tie strapped my FM alarm attenna wire along it to the bottom (for a verticle run/better reception)
 
If you have less than 3 hoses hanging down there, I suggest you fish them back down and put them in the ring near the right rearset.

If you lift your tank, these tubes get sucked back up and have to be fished out every time you drop it back down.
 
I got off work yesterday and saw a hose hanging by the frame stand. its looks like its coming from the air box as a breather valve. it was leaking a little bit of oil, very little. the hose is all black with a single white ring and it cut at an angle. any know about this hose or if its been there the whole time and i didnt notice it. it looks like i have two breather valves. any help would be greatly appreciated.UGH! thanks.

:banghead::banghead::rtfm:

make sure to let us know when you notice that only one headlight "works"....... ;)
 
Last edited:
A little stressed out today Boneman? :D

Lol.

Hey I don't ask for much and like being helpful...but geeze com'on. Some ppl need to start swimming towards the deep end of the gene pool....

I think it was the whole "HELP" title that set me off. Help to me implies that one has an urgent (or actual) problem at hand.
 
Last edited:
I too am usually very impatient with retardation, but on forums you never know if it's an innocent question from a n00b, or someone really not making any effort... so I usually take a few minutes before posting... it helps avoid cussing ppl out :D

Now if it's always the same guy... that`s a different story.
 
True, true. I'm not known for my patience.

+1 to "someone really not making any effort". This is usually the case and chaps my a$$.

I don't mind helping those who want to help themselves. I've never understood ppl who post something that probably took longer to sign up and post it on a forum, then to just Google it or simply filp open their owners manual and have a look!

I'll make a deal with everyone here...I'll stand back and take 10min before I post a retort to seemingly "silly" questions, if the poster also takes 10min and tries to figure it out or research it. :D :thumbup:
 
Bringing the thread back round to the original topic, I noticed that one of my breather pipes has fallen down a bit at some point over the last couple of weeks (possibly from the recent heat). I understand that the white ring indicates the original position, but does anybody know what this should be aligned to? The plastic clip?
 
Last edited by a moderator:
Well, Boneman, I'm maybe kinda glad this was posted because now, I learned/suspect that I may have inadvertently pulled up one hose? All I have is a small hose and a wire that goes to the exhaust at the very bottom. And the hose that serves as overflow/air vent isn't easy to trace. I had to really look to figure it out. At any rate, this talk of three (3) hoses (one is not a hose but a wire!) has got me wanting to investigate. I have my tank up ALL THE TIME (however, I don't ride with it up). Now, Boneman, this isn't to say that it's not annoying when people make .00001% to do something before they dial 911. I know somebody who often interrupts me regarding a newspaper section when, if she looked .00001% second more, she'd find it. Maybe what we need is an FZ6 lousy post tally: 3 strikes and you're out?
 
Back
Top