BThomas220
Junior Member
Alright so I was looking at the headers on the bike yesterday and I noticed some strange coloring. 3 of the four headers were slightly blue up near the exhaust ports and one of them wasn't. I feel like they should all have some bluing.
I have not noticed any appreciable loss in power, I am just trying to figure out what could be causing the issue.
I am leaning towards a richer or leaner fuel condition at the injector.
Any input to the problem would be greatly appreciated.
I did just recently install a PC3. I used the stock bike map.
The bike is an 04 with 33,000 miles
Thanks for the help
-Ben
I have not noticed any appreciable loss in power, I am just trying to figure out what could be causing the issue.
I am leaning towards a richer or leaner fuel condition at the injector.
Any input to the problem would be greatly appreciated.
I did just recently install a PC3. I used the stock bike map.
The bike is an 04 with 33,000 miles
Thanks for the help
-Ben