luckyirishboy209
custom fz6 foot peg maker
[nomedia]http://www.youtube.com/watch?v=EY4D2n1cIOA[/nomedia]
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
head light mod
- Thread starter luckyirishboy209
- Start date
luckyirishboy209
custom fz6 foot peg maker
ya looks easy to do
Pimpson
Junior Member
Just buy the wire from bd43. Much less invasive. Easy to do also.
luckyirishboy209
custom fz6 foot peg maker
what do you mean bd43?
Pimpson
Junior Member
sure do..... http://www.600riders.com/forum/how-tos/1666-bd43s-07-headlight-mod-part-2-a.html
PM Biker_Dude and he'll give you details on the wire. I can tell you though that it is extremely well made, simple to put on, and works perfectly. Well worth the money. It does no damage at all to the wires, you can take it off completely if you wanted to and it leaves no trace.
PM Biker_Dude and he'll give you details on the wire. I can tell you though that it is extremely well made, simple to put on, and works perfectly. Well worth the money. It does no damage at all to the wires, you can take it off completely if you wanted to and it leaves no trace.
necrotimus
Stop looking at my title!
+1 on the wire from biker dude. You can also splice into it for other mods that recommend splicing into the headlight wire also allowing you to remove those mods while leaving the wiring in factory condition.
luckyirishboy209
custom fz6 foot peg maker
i know it is not as clean as biker dude's mod. but i did it the way on youtube and it took me about 10min. and i cant see any wires. looks clean:thumbup: but if you have the time and the prongs to plug into your wire fitting, then go for biker dude's cant get any better than his mod:rockon: but if you want to do it quick and easy try this one.
steveindenmark
Older Member
I did it the Youtube way and it is difficult to see that I have done it. It would also take me 10 minutes to take out and you will never know it has been there.
Having said that. If you do it the Youtube way, one of your lights will be on full beam all the time. That does not bother me because at least they can see me coming.
Steve
Having said that. If you do it the Youtube way, one of your lights will be on full beam all the time. That does not bother me because at least they can see me coming.
Steve
I think that the biker's dude is the most prof way to do the dual headlight mod and congratulations to him that did all that grate job. I tried this way Gand's simple FZ6 Dual Headlight mod to do my mod because i couldn't find the little connectors nowhere here in greece.
:thumbup::thumbup::thumbup:
:thumbup::thumbup::thumbup:
