- Joined
- May 6, 2014
- Messages
- 1,980
- Reaction score
- 1,929
- Points
- 113
- Location
- Amoungst the Twisty Roads
I've owned an FZ6 for a few years now (it might be 4 years?). I bought it from a friend of my son to help him out. I've done some mods to it such as RaceTech Emulators in the forks, a Two Bros exhaust and a gel seat. But of the four bikes I own, this bike gets ridden very little - maybe 200 miles a year - which is a shame because it's a nice bike. Two of my other bikes (cafe racer and street tracker, both customs) are "naked" in that they don't have a fairing or a wind screen. I was riding the FZ a week or so ago and needed to stretch my legs. As I stood up I was amazed at how quiet and smooth everything got. In that moment I realized that it was the wind buffeting and noise that keeps me from riding this bike.
So this winter the front fairing is coming off this bike and it will be replaced with a 7" round headlight. I do have a few questions to support this project.
- The bike is an '05, so it has the round digital instrument cluster. I see on eBay that there is a cover and bracket available for about $20. What is the general consensus of this plastic cover? Does the incorporated bracket put the instrument cluster at a good angle? Is there a better way to go? I wouldn't mind installing an aftermarket cluster (like an Acewell unit), but I'd rather not lose the fault/error code readout.
- I know that many swap out the bars for FZ1 flat bars, but I do like the sit-up-n-beg riding position of the FZ6. The OEM bars that are on the bike now look a bit beat to me so I'm going to either update them with Renthal bars or a used, but in perfect shape, OEM bar. For those that keep the profile of the OEM bars, what profile is usually used?
- I'm planning on using bar-mount mirror mounts from Bikemaster because they are only $7 each - but is there a better alternative? I'm not apposed to getting a clutch perch with a mount built in...and it looks like the brake-master assembly could be tapped for a 8mm mirror mount. What is typically done during the naked conversion?
Thanks for any and all feedback.
So this winter the front fairing is coming off this bike and it will be replaced with a 7" round headlight. I do have a few questions to support this project.
- The bike is an '05, so it has the round digital instrument cluster. I see on eBay that there is a cover and bracket available for about $20. What is the general consensus of this plastic cover? Does the incorporated bracket put the instrument cluster at a good angle? Is there a better way to go? I wouldn't mind installing an aftermarket cluster (like an Acewell unit), but I'd rather not lose the fault/error code readout.
- I know that many swap out the bars for FZ1 flat bars, but I do like the sit-up-n-beg riding position of the FZ6. The OEM bars that are on the bike now look a bit beat to me so I'm going to either update them with Renthal bars or a used, but in perfect shape, OEM bar. For those that keep the profile of the OEM bars, what profile is usually used?
- I'm planning on using bar-mount mirror mounts from Bikemaster because they are only $7 each - but is there a better alternative? I'm not apposed to getting a clutch perch with a mount built in...and it looks like the brake-master assembly could be tapped for a 8mm mirror mount. What is typically done during the naked conversion?
Thanks for any and all feedback.