Givi V46 Topcase on TB Exhausts??

[brico]

Hi

I purchased Givi V46 Topcase but the mounting hardware is for stock exhaust and I have TBs? Has anyone successfully installed it on aftermarket exhaust? The rounded brackets that wrap around the exhaust cover are not fitting well and are wrapping around the exhaust exactly where TBs supporting rings are fitted. This is 4mm thick forged steel bracket so I do not think any bending is possible. Any help from anyone would be much appreciated. If not successful i'll have to sell this.

 

[goker]

I don't know how much larger TBs compare to Laser Quads, but here is what I did. You may be able to do something similar.

Good luck.

http://www.600riders.com/forum/fz6-mods/26939-long-awaited-question-has-been-answered-about-laser-quads-givi-racks.html

 

[Wade Poulsen]

I have the same set up with the TB's and the Givi Top case hardware. I put a FE on as it came with the TB's. The wrap around brackets I sawed off just below welded on screw. If you'd like i'll take some pictures tonight and post them. But the configuration is possible.

 

[DarkHorse]

I'm also interesting in seeing the pics of what you did.