FZ6 S2 2008 original LED blinkers install pics

[Audriuss]

Hello everyone,

Recently got onto two wheels and here is what I got, and what is my first mod.
I installed orginal yamaha LED blinkers (didn't like the aftermarket ones that are on ebay).
Upcoming mods:
- rear taillight LED;
- number plate resizing;
- original yamaha fly screen;

P.S. sorry if I make mistakes (English is not native).
P.P.S. sorry for pictures in any oder. It should be step by step or smth. like that..
P.P.P.S. it was only Iphone, that pictures where made with, glad that at least you can see something in them
P.P.P.S. yes, I know, my bike needs cleaning

 

[Audriuss]

some more 1...

 

[Audriuss]

some more 2...

 

[Motogiro]

Don't remember welcoming you to the forum so :welcome: Audriuss!!!

Those LED directionals look great! Didn't know Yamaha had those.

Thank you for the pics!

 

[dev_usc]

Looks great... did you have to slice the connector wires... the led connector seems to be different from the OEM...;

 

[mrphotoman]

those are really nice!

 

[FrozenBiker]

Slick looking bike. Kazza will like!

Those turn signals were listed in an FZ8 accessory collection that i saw a while back.

 

[Erci]

Love the signals and the bike in general!

 

[Audriuss]

Looks great... did you have to slice the connector wires... the led connector seems to be different from the OEM...;

I took old signals out, cut the wires anywhere before the original connector, and instaled led signal and that black thing (don't know the word in english) before connecting to original connector. No special tool was required. Everything was in the box with led blinkers..

Tools I used where:
- 6shape screew (to take of parts needed to go to wires)
- knife (to cut wires and make cut edges "naked")
- plears (to sqeeze connecting edges)

Time that took was something like 1hour...

 

[Audriuss]

Love the signals and the bike in general!

Thanks to YAMAHA desiners, that created it like this in first place

 

[Audriuss]

Slick looking bike. Kazza will like!

Those turn signals were listed in an FZ8 accessory collection that i saw a while back.

and they are described as "fits most yamaha motorcycles". They are on fz6 accesory list either

 

[betterdees]

Hi Audrius, nice lights. How much u got the front n rear sets for?

 

[MiLToS_666]

I really like those too and I'm curious about the price since it's an original Yamaha accessory.
I'm searching for a good set of front & rear led signals to replace the OEM ones but the stuff on ebay look so cheap although really inexpensive!

 

[Jayson]

looks awesome... I didn't realize Yamaha even made those! I bought the Rizomas, but I may have considered the Yamaha ones had I known they were available. NIce Job!

 

[ticktock]

Yamaha might not advertise them in the states because the turn signal laws are different here than everywhere else. If you look at the stock Euro FZ6 compared to the US, the Euro has smaller signals. It's subtle, but you can tell the difference. Ours are bigger.

Granted, no one really cares or checks these days, but I bet Yamaha is just covering themselves.

To the OP: Great looking bike!