FZ6/FZ8 Clutch Holder Screws

[subaron]

I just bought a fz8 clutch holder and tried to swap it out with the one on my fz6, so that I can mount the mirror on the handlebar.

However, while I was taking off the screws a couple of the bolts got chewed. I had to drill the parts out, which means the bolts need to be replaced on the new clutch holder.

I was wondering if any one knows the size of the bolts 9 and 10 in the attached picture. I am assuming they are metric bolts.

Screw #9 - 57M-83358-00-00 (replaces 98704-03020-00)
Screw #10 - 98507-04010-00

 

[subaron]

I found out what was needed:

The #9 is a metric M3 screw
The #10 is a metric M4 screw

The dealership was going to take a week to order the screws in, so I just went to Canadian Tire and picked up what I needed. Hope this helps someone in the future.

 

[momonster]

Thanks for the info! I did the same thing over the weekend and was looking to order the the #9 screw.

 

[subaron]

Glad this info helped someone.

How did the assembly turn out? Did you drill and tap the master for the right mirror yet?

 

[zackeeboy]

I just swapped out the clutch perch with the FZ8 perch. Of course one of the screws sheared off while taking the stock apart so had to go to the hardware store and pick up a new one. Plan on drilling and tapping the master for the other side but trying to get the tap. Saw a 10mm-1.50 drill bit and tap set - does anyone know if this will work? I thought I read that a 10mm-1.25 was needed...

 

[subaron]

Haven't had the chance to drill it. But read and heard from people who have done it. My biggest challenge was to acquire the tap. And got one off eBay. But it does not fit my drill set!!!

 

[n0other]

Could someone please post a part code or picture of the clutch holder itself?

I need it to complete my naked conversion as well, but don't wanna order the wrong part having not seen it.

Is this the one?

Thanks

EDIT:

Found it, it's 1B3-82911-00-00 if anyone else needs it.