Frame Slider Bolt Length

[SANGER_A2]

I have R&G sliders and although they are designed to go with the lower fairing, the bolts were different lengths and had different size spacers etc. I also ended up having to use the stock washers after lots of experimenting finding the best combination of left/right bolts and spacers. There are details on my site. No problems installing though. The R&G instructions say removing one bolt is fine, just don't take the left and right engine bolts out at the same time!

 

[urbanj]

May be the problem or it may not but for me I found that the right side bolt was a little too long. So I added another stainless washer and it was perfect. Even tested it out and it worked just the way it should :thumbup: