Flush Mounts and Integrated Tail Installed...

[nlheikki]

The flush mounts and integrated tail really make the bike look much better. Here are some pictures...

 

[Botch]

Sweet! :thumbup: :thumbup: :thumbup:

 

[madmanmaigret]

looks really good!
I feel like a retard 'cause I was like "where are the turn signals in the back?" then I read your post........duh!

 

[ROACH1111]

That looks great...really cleans it up!:thumbup:

 

[ROACH1111]

I'm thinking about getting the Clear Alternatives smoke integrated taillight, and I found it for $75 on kneedraggers.com. Where did you get yours and for how much?

 

[nlheikki]

I'm thinking about getting the Clear Alternatives smoke integrated taillight, and I found it for $75 on kneedraggers.com. Where did you get yours and for how much?

I ordered my Clear Alternatives smoke taillight from ebay for 79.99 w/ free shipping. If you have any questions on the install when you get it, I would be glad to help out.

 

[bubbalove]

Couple of questions for you. What brand of flush mounts do you have installed and where did you find them? Are they just turn signals, or are they running lights also? Can you see them from the front(oncoming traffic)? What year is you bike? I like how they look, but I want a running light/turn signal. I like to be seen by drivers who don't pay enough attention. Not sure if I want to lose the running lighs?

 

[nlheikki]

Couple of questions for you. What brand of flush mounts do you have installed and where did you find them? Are they just turn signals, or are they running lights also? Can you see them from the front(oncoming traffic)? What year is you bike? I like how they look, but I want a running light/turn signal. I like to be seen by drivers who don't pay enough attention. Not sure if I want to lose the running lighs?

They are the 911 Moto Flush Mounts and I found them on Ebay......they sell around 20 bucks. They are only turn signals because they only come with a power and ground wire (not a third for running lights). You can see them from the front when they are blinking. And my bike is a 2004 FZ6.

Hopefully that helps you out. If you needed pictures/video of them blinking, I could post some.

-Nick-

 

[bubbalove]

thanks for the info

 

[CrazyBiker]

For Quick help see my thread http://www.600riders.com/forum/fz6-mods/3783-my-turn-signal-mods.html where I installed flushies front and back. I kept stock back signals for more visibility as the back signals are more important anyway. The front I have are blue similar to the OP has but they also work as running lights.

 

[nlheikki]

thanks for the info

No problem. Good luck with the Mods.

 

[OneTrack]

Was it easy to install the integrated tail light assembly?

 

[nlheikki]

Was it easy to install the integrated tail light assembly?

I thought it was very easy. The hardest part was removing the tail light from the tail section. Besides that, it went well.