BossZweifel
New Member
Hy Guys
In the past I had a couple of problems with my FZ6 N S2(2010-Model). After heavy rain the bike went out during a highway drive last year. Went to the shop and they cleaned all the connectors. Everything was ok after that.
Then the bike started to give me occasionally the Error 1 while driving (no speed, tacho nor temp. gauge). I figured that it'll 'solve' itself after about 5-10 mins of riding and went along with it - until last Friday.
Whenever I turn my bike off I made sure to NOT have the Error 1 displayed (made it ones and the bike did not want to start for many days). The problem now is, that my bike won't start at all even though it didn't show the Error 1 on the last ride.
It just shows:
The Immobilizer blinks 6 times slowly and then 3 times fast in endless repeat (WTF does that mean?)
Apart from that everything is ok. Kill-Switch works properly, starter and fuelpump are working correctly. But only the ignition won't do it's job.
Today I worked on the problem and did the following:
Assembled the whole bike again, but the problem still remains. And of course i tried it with all the keys including the red Masterkey.
Does anybody know what the 6-3 flashing means? Or how I might be able to get the bike running again?
Greetings from Switzerland
Chris
In the past I had a couple of problems with my FZ6 N S2(2010-Model). After heavy rain the bike went out during a highway drive last year. Went to the shop and they cleaned all the connectors. Everything was ok after that.
Then the bike started to give me occasionally the Error 1 while driving (no speed, tacho nor temp. gauge). I figured that it'll 'solve' itself after about 5-10 mins of riding and went along with it - until last Friday.
Whenever I turn my bike off I made sure to NOT have the Error 1 displayed (made it ones and the bike did not want to start for many days). The problem now is, that my bike won't start at all even though it didn't show the Error 1 on the last ride.
It just shows:
- HI-Temp
- Flashing Immobilizer
The Immobilizer blinks 6 times slowly and then 3 times fast in endless repeat (WTF does that mean?)
Apart from that everything is ok. Kill-Switch works properly, starter and fuelpump are working correctly. But only the ignition won't do it's job.
Today I worked on the problem and did the following:
- Take battery out and charge
- Remove all connectors and clean them
- Check Fusebox
Assembled the whole bike again, but the problem still remains. And of course i tried it with all the keys including the red Masterkey.
Does anybody know what the 6-3 flashing means? Or how I might be able to get the bike running again?
Greetings from Switzerland
Chris