ltdillard
commutaholic
Recently added a Fenda Extenda so thought I would post a couple of pictures. I opted to simply glue it (thanks for some tips from TownsendsFJR1300).
First I removed the fender and taped a towel around it to keep it from getting scuffed up. I dry fitted the FE to see where it needed to go and got some clamps and glue ready.
I used regular PVC glue, like you would use on water pipe and applied only to the Fender Extender. I used some tape around the outer edge of the fender to help protect it, but I think that was over-kill and it was kind of in the way when determining if I had the FE lined up like I wanted. After applying the glue you have some time to still move it a little. I clamped it and left it for several hours to thoroughly dry.
So far it's on solidly. I've commuted a handful of times and there seem to be no issues. I'm hopeful it will help deflect junk off the pipes & radiator better.
First I removed the fender and taped a towel around it to keep it from getting scuffed up. I dry fitted the FE to see where it needed to go and got some clamps and glue ready.
I used regular PVC glue, like you would use on water pipe and applied only to the Fender Extender. I used some tape around the outer edge of the fender to help protect it, but I think that was over-kill and it was kind of in the way when determining if I had the FE lined up like I wanted. After applying the glue you have some time to still move it a little. I clamped it and left it for several hours to thoroughly dry.
So far it's on solidly. I've commuted a handful of times and there seem to be no issues. I'm hopeful it will help deflect junk off the pipes & radiator better.