JoeSTL
Member
No problem bro. Thanks for the update!
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Custom exhaust $200 shipped
- Thread starter phranK2k11
- Start date
No problem bro. Thanks for the update!
phranK2k11
Chat Camper :)
As promised your exhaust was picked up by the fed-ex guy this afternoon.
Fed-Ex tracking no: 915479615004834
But since the weather cut my available build time (the shop I use is 37mi from home and I have to have the bike there to build off of = no work in the rain) in half I skipped the pics that CADMAN wanted :spank: Sorry man!
Let me know when you get it mounted Joe!
Fed-Ex tracking no: 915479615004834
But since the weather cut my available build time (the shop I use is 37mi from home and I have to have the bike there to build off of = no work in the rain) in half I skipped the pics that CADMAN wanted :spank: Sorry man!
Let me know when you get it mounted Joe!
JoeSTL
Member
Awesome! I love that I'll have it by this weekend. I'll make sure to take pics and video once it's installed.
CADMAN
Member
Hey Joe, could you get some pics with dimensions before your install. Since phrank2k11 couldn't get pics during the build, I'm trying to get some info for a modified setup and maybe pass along to others for their own DIY attempt. Any help is greatly appreciated.
Last edited:
JoeSTL
Member
Yeah, that shouldn't be a problem. I'll post them up here when I do the install.
CADMAN
Member
COOL! Thanks guy. Post up or PM me for email info.
JoeSTL
Member
Got it in today! Here are some pics of it out of the box and measurements for Cadman. Phrank: the packing was perfect. Once I get those pics from you, I'll let you know how the install goes.
Measurements
Measurements
phranK2k11
Chat Camper :)
Glad it got to you without poking holes in the box. I just sent you email with pretty detailed step by step instructions that should get you from stock to BYF glasspacks in about 30-40min.
Please post your opinion of the new sound when you get it bolted up. And let me know if there are any problems, like Dave's issue with the mount and Ed's busted box that led to chipped paint.
Next (last) kit will start AFTER Joe's review. So stay tuned for it and watch for the "who's next" post to follow.
Please post your opinion of the new sound when you get it bolted up. And let me know if there are any problems, like Dave's issue with the mount and Ed's busted box that led to chipped paint.
Next (last) kit will start AFTER Joe's review. So stay tuned for it and watch for the "who's next" post to follow.
edfz6
Junior Member
CADMAN
Member
Got it in today! Here are some pics of it out of the box and measurements for Cadman.
Measurements
You guys are great. Exactly what I needed on the dimensions. I'll draft this up and post. I'm trying the drilled baffle on a second exhaust in the meantime. Thanks again
JoeSTL
Member
Just finished with the install. Holy crap, this is so much louder than stock. I thought you were joking when you said 'sorry neighbors'. Once I fired her up, my first thought was 'sorry neighbors', since most nights I come back from work around midnight or so...LOL.
The instructions and pics were great, and made the removal of stock parts and the install very easy. It took me a couple hours total, because I ran into a couple problems. The bracket that holds onto the back of the fender eliminator I have had to be removed to get your exhaust in there. So I scratched up the bottom of the cans a bit, before I realized I had to remove it. When I went to put it back on, it didn't fit. It is supposed to screw in, while the sides are around this 'nub'. I ended out having to grind down the section a little bit to fit around that piece. Pics a are attached.
Then I had some difficulty drilling the hole in the billet aluminum fender eliminator, mostly because my drill and bits suck...lol. I ended out using a dremel tool with a drill bit and made the hole in seconds.
Once everything was put together, I looks great and sounds amazing. Of course it was pouring rain during the entire install so I'll have to let you know how it sounds when riding tomorrow.
The fender bracket:
The area I had to grind down to fit securely in place:
The instructions and pics were great, and made the removal of stock parts and the install very easy. It took me a couple hours total, because I ran into a couple problems. The bracket that holds onto the back of the fender eliminator I have had to be removed to get your exhaust in there. So I scratched up the bottom of the cans a bit, before I realized I had to remove it. When I went to put it back on, it didn't fit. It is supposed to screw in, while the sides are around this 'nub'. I ended out having to grind down the section a little bit to fit around that piece. Pics a are attached.
Then I had some difficulty drilling the hole in the billet aluminum fender eliminator, mostly because my drill and bits suck...lol. I ended out using a dremel tool with a drill bit and made the hole in seconds.
Once everything was put together, I looks great and sounds amazing. Of course it was pouring rain during the entire install so I'll have to let you know how it sounds when riding tomorrow.
The fender bracket:
The area I had to grind down to fit securely in place:
JoeSTL
Member
The best pic I can do now with since it's dark and raining outside:
phranK2k11
Chat Camper :)
I'm not sure why you had to modify that bracket, it's a stock part. I have an 06' and mounted your kit to my bike without any issue. I wonder if the PO of your FZ monkeyd around with it somehow?
Have you had a chance to ride yet? Hows the sound?
Have you had a chance to ride yet? Hows the sound?
JoeSTL
Member
When I got it, it was completely stock with only 1500 miles on it, so I doubt the guy did anything to it. Hell, he barely rode it! lol
Rode it around yesterday a little and to work today. Love it! It is loud, but not crazy loud. Though I have noticed plenty more head turning.
I know you said it doesn't offer any increases performance, though I must say, I have been going much faster since I put it on. Gotta twist the throttle to get that awesome sound! lol
phranK2k11
Chat Camper :)
Now seems like a random enough time to catch everyone by surprise.....
For the final build!
Ok, who's next?
For the final build!
Ok, who's next?
Ohendo
Site Supporter
Not me, but if I did.....First!
Just kidding around. Next?
Just kidding around. Next?
TheRabbi
Junior Member
This is so incredibly tempting! However, since the spirit of this build is for those who cannot afford an aftermarket exhaust, I should bow out. Technically, I have the means but cannot justify spending the $800ish dollars on it.
If you change your mind and turn this into a long-time endeavor, I may have to jump in down the road. :rockon: Keep up the awesome job man! I love it! :thumbup: :cheer:
microage97
Junior Member
They are awesome! I have about 2000 miles on mine and they do seem to get a little louder with age and use. One thing I do notice is that you can tell when the motor derates itself when you run 91 octane with ethanol and when you run non ovy 91 octane...
Dave
Dave
microage97
Junior Member
Everything is faster with glass packs.
JoeSTL
Member
Jesus, isn't anyone going to claim the last one? These things are awesome! If you got 200 bucks you'll love it I swear!
