stormgrey111
New Member
So, when I press on the starter, it's going click click click.
Battery is about 2 years old showing 12.9 volt
There is an error code 12 which I believe is the crankshaft position error which can also be caused by not enough voltage to the ECU.
Upon reading post after post it looks like it could be a faulty kill switch, a bad ECU, a bad starter relay ,some corrode wires somewhere under the tank, a bad flex capacitor, etc
I am not that mechanically declined to take all that apart. What would be the best way to troubleshoot here ? Start with load testing the battery ?
thanks
Battery is about 2 years old showing 12.9 volt
There is an error code 12 which I believe is the crankshaft position error which can also be caused by not enough voltage to the ECU.
Upon reading post after post it looks like it could be a faulty kill switch, a bad ECU, a bad starter relay ,some corrode wires somewhere under the tank, a bad flex capacitor, etc
I am not that mechanically declined to take all that apart. What would be the best way to troubleshoot here ? Start with load testing the battery ?
thanks