goose111
New Member
I am wondering if anyone has experience with -1/+2 (15,48T) sprockets. Did you have to change the chain length or are you still running 118 links?
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Chain length when going -1/+2
- Thread starter goose111
- Start date
- Joined
- May 6, 2014
- Messages
- 2,532
- Reaction score
- 2,841
- Points
- 113
- Location
- Amongst the Twisty Roads
If your axle is near the middle of the adjustment range you will have enough adjustment to accommodate either of those situations. Going -1 on the front sends the axle back about 1/4-in and going +2 on the rear sends the axle forward about 3/8-in. If your axle is already biased towards the rear of the adjustment, then your chain is worn anyway.
goose111
New Member
Yes, my chain & sprockets are in dire need of being replaced. Sounds like on my new 530 chain I will still run 118 links.
