Bought Salvage FZ6, need to get it to start

[Truthalive7]

Hey guys, I got a Salvage FZ6 for my birthday as a project bike. Most of the bike is in pretty good condition. but I need to get the engine to start. What I think is the ignition wiring harness goes to fuse box that is destroyed, and I have no clue which wires go to what. Does anyone know hot to hotwire it? I want to see how well the engine runs, if at all before I start to work on other stuff. Thanks!

 

[Ridgeback]

Your best bet is to read through the manual and trace the wiring

Your probably a genuine guy,but its a bit moody when someone asks how to hotwire a bike in their first post and I can't see too many people telling you how on a public forum fella.

 

[Scorphonic]

Ridgeback is right truthalive,

Either your theory is correct or the ECU could also be fried. You'll have to buy the haynes manual for the bike and give it a very good read. There are numerous reasons why this bike may fail to start. Best bet is to check the fuses, replace them and see what happens. Change the oil/petrol, check the spark plugs, check the battery!

 

[Cali rider]

This is post is very similar to another about 1 year ago:
http://www.600riders.com/forum/fz6-technical/15214-help-stolen-bike.html

No help will be offered, thread is closed.