Blinker Problems

[Hank the Tank]

Heres the deal, recently put a fender eliminator kit on the bike. Has been working fine. Made a few adjustments to it and I think the license plate light wires touched and the blinkers are now not working at all. Pulled the fuse it was fine. So as of now no blinkers or hazards. Any ideas what's wrong?

 

[segue00]

Check the fuses again... All of them!

 

[ant_mb]

The fuse your looking for is seperate from the big fuse box. I think it's a yellow case right beside the fuse box and is labeled TAIL. It is a 10 A fuse and controls the blinkers, flashers and tail light.

 

[Hank the Tank]

Problem solved it was right where you said to look Ant. With that out of the way its time to ride.

 

[ant_mb]

I've blown that fuse sever times in the past. I had my Autocom tapped into the constant power of the tail and it grounded out on the exhaust and blew the fuse a few times. It took me forever to find out why the fuse was blowing, but I got real good at changin it.