shuckle
Junior Member
Hi,
I just changed my coolant following the instructions in the service manual.
I removed the inner fairings, fuel tank, didn't remove the reservoir, removed the bolt from the fuel pump and the cap.
I plugged in the two electrical connectors on the fuel tank and the three tubes.
When I turn on the bike there are no warning lights. Press the starter and it just makes a loud buzzing noise. When I release the starter I hear the fuel pump.
The bike was fine before the coolant change.
The bike is a 2006.
Thanks for any help.
I just changed my coolant following the instructions in the service manual.
I removed the inner fairings, fuel tank, didn't remove the reservoir, removed the bolt from the fuel pump and the cap.
I plugged in the two electrical connectors on the fuel tank and the three tubes.
When I turn on the bike there are no warning lights. Press the starter and it just makes a loud buzzing noise. When I release the starter I hear the fuel pump.
The bike was fine before the coolant change.
The bike is a 2006.
Thanks for any help.